Hot Thermoplastic Road Paint, Glass Bead and Road Marking Primer at Stock For Sell.
Min Amount To Sell: 100
Hot Thermoplastic Road Paint, Glass Bead and Road Marking Primer at Stock For Sell. AASHTO M249-98(USA) Standard
Another accompaniment specifically used on concrete surfaces. Recommended to be applied
before the application of road marking material for better bonding and smooth application of the
road marking material.
Directions For Use:
Ensure that the road surface is clean, free from dust and moisture.
Heavy deposits of paint require removal.
For aged asphalt roads and concrete roads, a primer coat is recommended before 20-30
minutes for proper bonding of the material with the road surface.
Ensure that the primer is thoroughly dry and void of solvent prior to application of the
Ensure temperature of 180 – 200°C and adequate agitation during application.
Do not hold thermoplastic above 180°C for more than 6 hours.
Do not heat the material above 220°C at any point of time .
Change in color indicates that the material has been scorched owing to overheating and
needs to be discarded
Drop – on glass beads must be immediately deposited after thermoplastic application.